BIGZXXL

Alright guys I am looking for some good advice on what prop choice will be best? I am looking at a 32 outlaw with t540's approx 625hp per motor. It currently has b1's with the extension boxs and 26p 4blade bravo props. what do ya think??

JaayTeee

If it's 1.36:1 ratio drives, that's probably about
the right setup.

BIGZXXL

its 1.5 sorry forgot to add that

JaayTeee

The motors must like running 6000 rpm then.


I have a simlar setup, but with less HP, and
can spin 32 Bravo's to 5450 ( rev limiter) rpm.

I have a relatively high X dimension, and
the best props that work on it are 32 maximus's

bbladesprops

JT's right, w need more info.

BIGZXXL

I haven't taken possession of this one yet so I am not exactly sure of the rpms just yet but I am pretty sure these props are not exactly right for the power. considering that it is still set up for the stock 454's. at risk of sounding like a idiot what exactly is the x dimension???

JaayTeee

X dimension is the distance from the centerline
of the crankshaft to the bottom of the hull ( directly
beneath the engine).


This translates to how far the propshaft is below
the bottom of the boat.

sacaja

i run 28 lab finished, 515 hp per side. 32 outlaw and its for sale, going to cigarette.

BIGZXXL

Sacaja give me some more details about the boat. may be intrested.

sacaja

i sent you a email, hope you got it?