19 Spline to 26 Spline Conversion Process
#1
Registered
Thread Starter
19 Spline to 26 Spline Conversion Process
I have 19 spline Arneson drives. Way more 26 spline surfacing props available.
Heard there was an adaptor, but it required some mods.
I assumed the adapter would slip on and I would maintain the ability to use 19 spline props.
Heard there was an adaptor, but it required some mods.
I assumed the adapter would slip on and I would maintain the ability to use 19 spline props.
#5
Registered
Join Date: Jun 2024
Location: Toledo
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I actually have adapters I had made for fit #6 props to 19 spline asd that I'm still testing since both Rik and Brett at Bblades weren't able to locate them, the only problem is finding props that work with my setup.