Jaws SS
02-15-2013, 03:07 PM
#21
Registered
Transom thickness is aprox 2.25 to 2.5 inches. Material wise i prefer Vinylester and 1708, the benefits of the VE are worth the extra couple bucks. If you are looking for a race layup three layers of half inch can be used instead of the normal two layers of three quarter. Heres an illustration i did for my upcoming book 
I'll check in more often, keep forgetting we have this new section on the board
I'll check in more often, keep forgetting we have this new section on the board
What would you buy/order for a typical transom say for a 19 or 20 foot boat? I always end up buying to little or way to much.
