Go Back  Offshoreonly.com > Technical > Restorations & Upgrades
38 KV Scarab restoration >

38 KV Scarab restoration

Notices

38 KV Scarab restoration

Thread Tools
 
Old 08-20-2015, 05:50 PM
  #1  
Registered
Thread Starter
 
buckknekkid's Avatar
 
Join Date: Jan 2002
Location: OAKVILLE, Ontario
Posts: 1,437
Received 1 Like on 1 Post
Default 38 KV Scarab restoration

Recent project in our shop[ATTACH=CONFIG]544445[/ATTACH][ATTACH=CONFIG]544446[/ATTACH][ATTACH=CONFIG]544447[/ATTACH][ATTACH=CONFIG]544448[/ATTACH][ATTACH=CONFIG]544449[/ATTACH]
Attached Thumbnails 38 KV Scarab restoration-img_20150428_112008.jpg   38 KV Scarab restoration-img_20150516_104349.jpg   38 KV Scarab restoration-img_6757-1-.jpg  

38 KV Scarab restoration-img_20150504_134136.jpg   38 KV Scarab restoration-empty-glass-bulkhead-change.jpg  
buckknekkid is offline  
Old 08-20-2015, 05:53 PM
  #2  
Registered
Thread Starter
 
buckknekkid's Avatar
 
Join Date: Jan 2002
Location: OAKVILLE, Ontario
Posts: 1,437
Received 1 Like on 1 Post
Default

[ATTACH=CONFIG]544453[/ATTACH][ATTACH=CONFIG]544454[/ATTACH][ATTACH=CONFIG]544455[/ATTACH]
Attached Thumbnails 38 KV Scarab restoration-img_6757.jpg   38 KV Scarab restoration-img_20150504_135246.jpg   38 KV Scarab restoration-img_20150529_102149.jpg  

buckknekkid is offline  
Old 08-20-2015, 07:56 PM
  #3  
Registered
 
Join Date: Oct 2012
Location: madrid, ia
Posts: 352
Likes: 0
Received 0 Likes on 0 Posts
Default

Man was she sunk at one time or just pure neglect?
sdg0080 is offline  
Old 08-20-2015, 08:02 PM
  #4  
Registered
Thread Starter
 
buckknekkid's Avatar
 
Join Date: Jan 2002
Location: OAKVILLE, Ontario
Posts: 1,437
Received 1 Like on 1 Post
Default

It was a long story of who actually rigged the boat originally , someone modified the stringers, a lot of blocked limber holes, lack of gelcoat and 5200 and a whole lot of neglect until now.
buckknekkid is offline  
Old 08-20-2015, 08:03 PM
  #5  
Registered
 
jeff32's Avatar
 
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,818
Received 407 Likes on 273 Posts
Default

Wet ride!!! Wow... Lots of work ahead!!!
jeff32 is offline  
Old 08-20-2015, 10:08 PM
  #6  
Platinum Member
Platinum Member
 
phughes69's Avatar
 
Join Date: Dec 2001
Location: St. Clair Shores, MI
Posts: 2,044
Received 99 Likes on 53 Posts
Default

Its typical Wellcraft construction. The boat is almost 30 years old.
phughes69 is offline  
Old 08-21-2015, 04:37 PM
  #7  
Registered
 
Join Date: May 2010
Location: Red Oak, Texas
Posts: 989
Received 182 Likes on 89 Posts
Default

The bright side.................I had rather dig out a completely rotted transom where 95% comes out with a screwdriver than one the has a little rot around the gimbles and you gotta take out 95% solid transom!!! LOL!
CDShack is offline  
Old 08-23-2015, 08:45 AM
  #8  
Registered
Thread Starter
 
buckknekkid's Avatar
 
Join Date: Jan 2002
Location: OAKVILLE, Ontario
Posts: 1,437
Received 1 Like on 1 Post
Default

It's pretty much done and back in the water
buckknekkid is offline  
Old 08-23-2015, 09:24 AM
  #9  
Registered
 
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes on 7 Posts
Default

That's the shortest restoration thread I have ever seen!
502ss is offline  
Old 08-23-2015, 09:25 AM
  #10  
Registered
Thread Starter
 
buckknekkid's Avatar
 
Join Date: Jan 2002
Location: OAKVILLE, Ontario
Posts: 1,437
Received 1 Like on 1 Post
Default

OK get ready for a LOT OF PICS
buckknekkid is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.