40' Outlaw Upgrades - Twin 900Sc to 1000hp Duramax Diesels
05-15-2020, 11:34 PM
#641
Registered
Thread Starter
Look what I found today...
The following 3 users liked this post by kidturbo:
05-16-2020, 04:36 AM
#642
Registered
One NXT and one #6?
The following users liked this post:
JaayTeee (05-16-2020)
The following 3 users liked this post by bor:
05-16-2020, 10:16 AM
#645
Gold Member
Gold Member
I think it's either wine glasses or an umbrella.
The following users liked this post:
Twin O/B Sonic (05-16-2020)
05-16-2020, 03:41 PM
#647
VIP Member
VIP Member
Monti;
I'll take whats behind box#1 please!
All kidding aside hope lowering and bigger props are the ticket!
We need results! (And warm weather!)
I'll take whats behind box#1 please!
All kidding aside hope lowering and bigger props are the ticket!
We need results! (And warm weather!)
__________________
Gary H...
Gary H...
The following 3 users liked this post by SUPERSTITIOUS:
05-16-2020, 09:19 PM
#648
Registered
Thread Starter
Opened em up, and it's just our same drives in Merc boxes.. 
Think they are gonna require a little paint work. Any suggestions on what sticks well to aluminum in salt water? The Awlgrip we previously used is impervious to salt, but totally allergic to any petroleum based oils. Which has caused them to blister badly every time a drop gets on em. For now, gonna break out some sanding balls and then pressure test this fix.
Think they are gonna require a little paint work. Any suggestions on what sticks well to aluminum in salt water? The Awlgrip we previously used is impervious to salt, but totally allergic to any petroleum based oils. Which has caused them to blister badly every time a drop gets on em. For now, gonna break out some sanding balls and then pressure test this fix.
The following users liked this post:
2187 (05-17-2020)
05-20-2020, 10:27 PM
#649
Registered
Thread Starter
Cleaned up that beautiful weld on the busted case, then pressure tested it with some soapy water. Next I hauled it down to my local welder buddy, who luckily a couple hours later, was able make all the bubbles stop..
Both lower units at paint shop now and hopefully back on the boat early next week.
Both lower units at paint shop now and hopefully back on the boat early next week.
The following users liked this post:
Twin O/B Sonic (05-21-2020)
