24' Outlaw 575sci Build
08-18-2021, 12:32 PM
#21
Platinum Member
Platinum Member
Nice work! If I might suggest one thing though. Ditch the adjustable motor mounts and go with a true offshore style mount. Why? Anything that can be adjusted will eventually drift out of adjustment - causing problems.
08-18-2021, 12:45 PM
#22
Registered
Thread Starter
I am with you, offshore mounts were my first choice but the 24 OL has super narrow stringers and I could not find a offshore mount that would fit. So the plan is to box the stringers with 1/2 aluminum brackets and use the mounts in the pic, once drive is aligned cut some SS sleeves that go over the threads on the bottom part of the adjustable mount so even if the lower nuts starts to walk over time it will rest on the sleeve. If the engine does need to come out over time its time for a 1071 !
The following users liked this post:
Too Stroked (08-18-2021)
08-20-2021, 08:05 PM
#23
Registered
Thread Starter
Took a little time to get the engine mounts in. Could not find an offshore mount narrow enough for the 20” stringers so this should do…
Last edited by Big_Baller; 08-21-2021 at 07:10 PM.
The following users liked this post:
IGetWet (09-16-2021)
