Scarab Pics?
#84
Registered
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
P.S. Here is a shot of what the dash board will look like with the new graphics.
Are you looking to go more wild then the red and white?
#85
Registered
No...I just painted it 2 years ago...I am real happy with the look. It used to be pretty disco with some orange in the color...I wanted a real clean and sexy look. I removed all the hardware including the rails and installed pop up running lights, cleats etc. The hatches all came flush mounted unless you had a blower motor... or tunnel ram....I sure some one modified it...If mine were flush I might put a low profile scoop back there. Good luck with your dash...there is not alot to work with. I will post a picture of mine...
#88
Registered
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Here is a quick shot at it, The resolution of the picture was a little low which is why it looks a bit grainy, It gives a good idea though. Any chance you have a side shot with a higher resolution.
#90
Registered
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Thanks, Your dash came out real nice too. I have some engine shots but they are @ home, I will upload tonight. The engines are out right now as they were a mess when I bought the boat. I am in the process of rewiring the entire boat and rebuilding the engines. I am modifing the engine mounts because 7 hours to remove the engines is not something I am willing to do more then once. I am designing the mounts so I can leave the exhaust manifolds on the engines when I remove them. anyway, I will upload some pics tonight.