81 Scarab project from hell
06-20-2008, 07:21 PM
#231
Registered
Thread Starter
Join Date: Jul 2005
Location: Spokane, Washington
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
06-20-2008, 10:05 PM
#232
Platinum Member
Platinum Member
Wow after reading your restoration thread I dont feel bad about my Apache I am restoring!!!! I thought it was taking me a long time to get it done, I have never restored a boat before and this is my first time. You have taken alot of time and care to get your boat done right, after 3 years I would have given up. Keep up the good work!!! it looks great!!, any new pics?
06-21-2008, 05:52 PM
#233
Registered
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
We have a company in town that does refits on big-rig enclosed trailers(vans) and the stuff they use is 1/2 inch plywood enclosed in fiberglass sheeting. They have tons of left over materiel, stacks of it even. I bought both the floor piece and a big enough piece to do my engine hatch for $40. The name of the company here is called Fibertech- maybe you have something similiar in your area. Hope this helps.
Is this there address?
3808 N. Sullivan Rd., Bldg 31
Spokane, WA 99216
06-21-2008, 05:56 PM
#234
Registered
Thread Starter
Join Date: Jul 2005
Location: Spokane, Washington
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
06-22-2008, 01:31 PM
#236
Registered
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Thanks but not right now, Let me look around here and see if I can find something, if not maybe I will take you up on the offer, I wonder if shipping would really be that bad, it doesnt weigh much does it?
06-23-2008, 11:49 PM
#237
Registered
Thread Starter
Join Date: Jul 2005
Location: Spokane, Washington
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
So I spent the day on it- spent about 4 hours driving around trying to get the right waterpump hose, struck out everywhere- after talking to Eddie I think my Air Gap manifold might be the problem( waterpump hose is one inch too short)
So I got the intake valves in, new blowers, the bilge pumps and the new wiring and cables, etc. I am amazed at how time consuming this stuff is- here is some more photos-
So I got the intake valves in, new blowers, the bilge pumps and the new wiring and cables, etc. I am amazed at how time consuming this stuff is- here is some more photos-
06-24-2008, 12:07 AM
#239
Registered
Thread Starter
Join Date: Jul 2005
Location: Spokane, Washington
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
So now I have to work on the wiring- anyone got any ideas on replacing the merc harnesses on the trim pumps? Other than the wires being old the original harness is still in good shape, so should I reuse it?
So here's my punch list-
Build a new panel under the dash, redo terminal blocks.
Wire bilge pumps, fans, trim pumps.
Install new battery boxes and fuel tank cover.
Install fuel pumps and fuel filters.
Change oil pan and oil filter mount.
Build a new hatch cover.
Install the rest of interior and carpet.
Theres a lot more but I'm getting there. Thanks Eddie for all your help!!!
So here's my punch list-
Build a new panel under the dash, redo terminal blocks.
Wire bilge pumps, fans, trim pumps.
Install new battery boxes and fuel tank cover.
Install fuel pumps and fuel filters.
Change oil pan and oil filter mount.
Build a new hatch cover.
Install the rest of interior and carpet.
Theres a lot more but I'm getting there. Thanks Eddie for all your help!!!
