exhaust options
#3
Registered
Join Date: Jan 2006
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Do you have the canister style mufflers in either corner of your engine compartment? You can either eliminate them with some angled adapters, or I am running silent choice' but I turned the Y pipes side ways so they feed the mufflersand have the through hull straight out the back. I'll try to post apicture if you're interested.
#5
![Default](/forums/images/icons/icon1.gif)
Originally Posted by chaineddown
Do you have the canister style mufflers in either corner of your engine compartment? You can either eliminate them with some angled adapters, or I am running silent choice' but I turned the Y pipes side ways so they feed the mufflersand have the through hull straight out the back. I'll try to post apicture if you're interested.
#7
Registered
Join Date: Jan 2006
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Here's what I did. The previous owner had put block off plates where the mufflers dump out and ran straight through hull exhaust. I converted it to silent choice.
Last edited by chaineddown; 06-16-2006 at 06:11 PM.
#8
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Jan 2001
Location: Houston, TX
Posts: 2,411
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thank god we dont have to have silent exhaust in my neck of the woods.
I have the stainless that dump out the back. That looks like what they put on the 26 scarabs back in 96 from the looks of it. I would end up putting some clamp on if I had to do it.
I have the stainless that dump out the back. That looks like what they put on the 26 scarabs back in 96 from the looks of it. I would end up putting some clamp on if I had to do it.
#9
Registered
Join Date: Jan 2005
Location: Lawrenceville, Virginia
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I used Lightning exhaust. I have been very impressed with them. and they sound great. I am toying with the idea to make them dry and have the water dumps. But for now it is loud enough.
#10
Registered
Join Date: Jan 2006
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by 29scarab
Thank god we dont have to have silent exhaust in my neck of the woods.
I have the stainless that dump out the back. That looks like what they put on the 26 scarabs back in 96 from the looks of it. I would end up putting some clamp on if I had to do it.
I have the stainless that dump out the back. That looks like what they put on the 26 scarabs back in 96 from the looks of it. I would end up putting some clamp on if I had to do it.
We don't have to run silent choice, but on our lakes, there are a ton of police boats looking for DUIs and will use any excuse to pull you over and do a "safety check". We run in silent mode after dusk to draw less attention to ourselves.