Go Back  Offshoreonly.com > Owners Forum > Scarab
Need Windshield for 87' Scarab III >

Need Windshield for 87' Scarab III

Notices

Need Windshield for 87' Scarab III

Thread Tools
 
Old 07-17-2007, 07:33 AM
  #1  
Registered
Thread Starter
 
Join Date: Feb 2006
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default Need Windshield for 87' Scarab III

Well, took a wave over the front on the weekend...outcome, shattered windshield into about 30 pieces.

Where, how, can I find a replacement? I have read many of these forums, but none have given an answer on how to find a windshield for older scarabs.

Even a template would be a godsend!!!
Seguin33 is offline  
Old 07-17-2007, 09:57 AM
  #2  
Registered
 
Scarab3DMC's Avatar
 
Join Date: Apr 2001
Location: Boynton Beach FL
Posts: 1,849
Likes: 0
Received 4 Likes on 3 Posts
Default

I used my old pcs. for a pattern and a local Plastics shop fabbed it..even if you only have 1/2 they can pattern..
Attached Thumbnails Need Windshield for 87' Scarab III-poker-run-2.jpg  
Scarab3DMC is offline  
Old 07-17-2007, 09:02 PM
  #3  
Registered
Thread Starter
 
Join Date: Feb 2006
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

problem is, I no longer have the old winshield.
Seguin33 is offline  
Old 07-23-2007, 12:56 PM
  #4  
Registered
Thread Starter
 
Join Date: Feb 2006
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

been searching all week. Everyone says the same thing, that I need my old one.

I do not know what else to do?
Seguin33 is offline  
Old 07-23-2007, 03:38 PM
  #5  
Rob
VIP Member
 
Strip Poker 388's Avatar
 
Join Date: Aug 2001
Location: Ms
Posts: 21,635
Received 8 Likes on 8 Posts
Default

Call Carlos at www.Acryilco.com. He made one from my old one and was very reasonable.He may already have a mold of yours?

Carlos # is
561-493-0146
Attached Thumbnails Need Windshield for 87' Scarab III-windscreen_2_001__medium_.jpg  
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.

Last edited by Strip Poker 388; 07-23-2007 at 03:44 PM.
Strip Poker 388 is offline  
Old 07-24-2007, 06:52 AM
  #6  
Registered
 
Scarab3DMC's Avatar
 
Join Date: Apr 2001
Location: Boynton Beach FL
Posts: 1,849
Likes: 0
Received 4 Likes on 3 Posts
Default

Thats the guy I was thinking of..Thanks Rob
Scarab3DMC is offline  
Old 07-24-2007, 07:37 AM
  #7  
Registered
 
Queenie's Avatar
 
Join Date: Nov 2004
Location: Fairport Harbor OH
Posts: 2,423
Likes: 0
Received 0 Likes on 0 Posts
Default

Send Shagnasty a PM. He blew his windsheild out of his Scarab a few years back and replaced it. Not cheap, that's for sure.
Queenie is offline  
Old 07-24-2007, 08:23 AM
  #8  
Registered
 
Scarab3DMC's Avatar
 
Join Date: Apr 2001
Location: Boynton Beach FL
Posts: 1,849
Likes: 0
Received 4 Likes on 3 Posts
Default

Originally Posted by rastinger
Send Shagnasty a PM. He blew his windsheild out of his Scarab a few years back and replaced it. Not cheap, that's for sure.
Remember Frank did the same with mine...
Scarab3DMC is offline  
Old 07-24-2007, 09:27 AM
  #9  
Registered
Thread Starter
 
Join Date: Feb 2006
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes, I spoke with Carlos. He said he was able to do the model without the frame.

He can't do the one with the frame unless he has the boat.
Seguin33 is offline  
Old 07-24-2007, 12:52 PM
  #10  
Registered
Thread Starter
 
Join Date: Feb 2006
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

Do any of you guys know who originally made the windshields for scarab? I contacted them , no reply.

I also thought Taylor Made..but a phone call to them turn out wrong. Wasn't Taylor made.
Seguin33 is offline  


Quick Reply: Need Windshield for 87' Scarab III


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.