84 Scarab Renovation (ongoing)
#522
Registered
Thread Starter
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Looks great do you want to put a set of original Kaama water pickups on it I have all the pieces to weld up a least 50 of each left over. Send me your address and I will send you a set pieces to build a couple just have to weld them together and from the looks of your build that should be no problem.
#527
Registered
That's what mine have, I never knew they were a real Kaama part! Cool!
#530
Registered
Thread Starter
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Got all the mockup done for drives and hydraulics. Had to 3D print a mockup steering ram holder to make sure everything was going to work. Need to locate the hydraulic line connections and then unbolt everything so I can pull the drives apart and get them prepped for paint!
Almost time to finish the transom!
Almost time to finish the transom!