89 Panther here we go
#41
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lake County. Ohio
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
I have noticed that you redoing a panther I have a pair of 420hp, transmissions and trs drives that I will be selling soon if you are interested let me know [email protected]
I have been working on blanking out the back of the transom the last few days so I could go with any option I want.
filling in the drive's and exhaust holes has taken way more time and epoxy then I ever thought it would have. The transome outer skin was 1/2" thick and I wanted it rock solid so I tapered the edges out over 4" and filled it staggered layers of 1708 over lapping each other. It took over 9 layers to get almost flush with the outside. plus a gallon of epoxy.
I'll post some pics soon
#42
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lake County. Ohio
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Heres some pictures of the back of the boat and the filling of the drive and exhaust holes. I was able to get some epoxy with 404 and air bubbles on. looks rough but it's coming along.
Sunday I'll start hitting it with an air board and some more coats.
Sunday I'll start hitting it with an air board and some more coats.
#43
Custom Interiors & More
wow nice work we should hook up. I plan on making custom raised hatches but I want take the bolsters and make them simular to the ones like powerplay's with the outside arm rests that have built in throttles and cup holders or something like that. I also have to make a custom back seat with very heavy padding and a rap around look. I found a panther tatoo that I like and want to use on the sides of the boat b ut maybe we could come up with some way to use it on the interior.
XT
#45
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lake County. Ohio
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
measurements would help. I don't know if there is a difference in years but if you don't mind thanks.
even a picture would help although I think mine is going to be different because I have bravo's and I'm moving my motors out 1 1/2" and up 3 1/2" with drive extensions also.
thanks again Keith
#46
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lake County. Ohio
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Well it's a pretty bad weekend for boating this weekend so I have dedicated this one to the scarab. After doing the sons transom and dealing with a bad break up with Donna I'm back at grinding and the sweet smell of epoxy curing.
Ok the focus is on the two main bulkheads the one at the helm was and is a pain in the but because of allot of very bad lamination of the old tabbing. Every time I start grinding Im finding holes or pockets where there is no bond.
Now that it's all ground out I laminated two pieces of 1/2" with 1708 and screwed them together with wood screws. Then rounded the top with my grinder and covered them with two layers of 1700.
Ok the focus is on the two main bulkheads the one at the helm was and is a pain in the but because of allot of very bad lamination of the old tabbing. Every time I start grinding Im finding holes or pockets where there is no bond.
Now that it's all ground out I laminated two pieces of 1/2" with 1708 and screwed them together with wood screws. Then rounded the top with my grinder and covered them with two layers of 1700.
#47
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lake County. Ohio
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
After the resin was hard I ground of the excess and fitted it to the hull. After it all fit nice I mixed up some epoxy with cabosil and fiber millings I bedded the bulkhead to the hull and filled the gaps where the only two stringers that are not coming out. Tomorrow I will tab it all in with 1700 and start removing the rear bulkhead.
#50
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lake County. Ohio
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
started to tear out the back bulkhead. It's hard to belive that this boat has not seen water in over a year and when I cut into the old stringers water just pours out it's soaked like a wet sponge.
What would have happened if someone bought this boat and dropped a motor in it and tried to take it out? It makes me wonder how many boats are out there in bad shape?
What would have happened if someone bought this boat and dropped a motor in it and tried to take it out? It makes me wonder how many boats are out there in bad shape?