Back from the Dead; '81 Scarab 38 Resto
#921
VIP Member
VIP Member
Thread Starter
There still some finishing up to be done in the bilge area there. I’m going to make it smoother but it won’t be as smooth behind the engines obviously as it is in the area that shows. Also where the bilge pump sits I did not core so it will be lower than the rest of the engine compartment so water will shed there and hopefully only be in that area.
The following users liked this post:
larslindroth (05-21-2020)
#923
VIP Member
VIP Member
Thread Starter
Thanks Jeff. Urethane primer going on the deck. Sand this and paint is next. Handy Dandy little bilge pump came in. It will sit in the little valley in the rear of the bilge. Should keep sloshing bilge water to a minimum...
The following users liked this post:
hblair (05-22-2020)
#925
VIP Member
VIP Member
Thread Starter
Thanks, i’m happy with how the gunnels and walkway turned out. They were extremely wavy. Few places to block out, but overall close...
Last edited by hblair; 05-22-2020 at 01:07 PM.
The following 6 users liked this post by hblair:
akattack (05-22-2020), golfmaxgolf (05-23-2020), Knot 4 Me (05-22-2020), rak rua (05-22-2020), Team Archer (05-22-2020), Tiki Joe (05-22-2020)
#926
Registered
Awesome craftsmanship
Just wow
Just wow
The following 3 users liked this post by akattack:
#928
VIP Member
VIP Member
Thread Starter
Andy that is a sweet ride. I always liked the mopars even when they weren’t “cool” back in the eighties. Which engine is in that?
Winston also sprayed the k planes today...
Winston also sprayed the k planes today...