Back from the Dead; '81 Scarab 38 Resto
#931
VIP Member
VIP Member
Thread Starter
#932
VIP Member
VIP Member
Thread Starter
The following users liked this post:
sailtexas186548 (05-23-2020)
#934
VIP Member
VIP Member
Thread Starter
I finally broke down and ordered some aluminum, a friend of mine is getting the sheet cut to size as well as the plate on the bottom and the tubing. The hard to find part is the (about) 13” radius elbows. It took a long time to find those. Hope to get the material here in the next few weeks and get that tacked together. Also looking forward to paint. This is 4 years coming lol
#936
VIP Member
VIP Member
Thread Starter
Haven’t got as much done the last week or so. Billy got the transmissions painted. Got the bellhousings, trannys, and drivelines put together. I had to get my friend to machine the transmission plates to fit the arneson driveline/double u joints. I’m gonna be slow for a few weeks. Hernia operation in one week. It’s gonna be a lot of fun.
The following 2 users liked this post by hblair:
larslindroth (06-07-2020), scarab377build (06-04-2020)
The following 4 users liked this post by jeff32:
#938
Gold Member
Gold Member
Have several friends who've had hernia op's, just make sure you rest up properly before attempting too much.
We can wait for more updates while you recover.
RR
We can wait for more updates while you recover.
RR
The following 2 users liked this post by rak rua:
hblair (06-04-2020), larslindroth (06-07-2020)
The following users liked this post:
hblair (06-04-2020)