Who out there has 38 avs boats with bigger power
#11
Registered
Thread Starter
#12
Offshoreonly Advertiser
Offshoreonly Advertiser
Whats a 38AVS with 600 Volvo package run?
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#13
Registered
Thread Starter
#14
Registered
#15
Offshoreonly Advertiser
Offshoreonly Advertiser
I was told the 600's ran mid 80's, just checking!
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#16
Nice boat 5050 , I think we were tied up next to you guys at the shoot out on Sat. ........my daughter really liked the graphics
l say milder motors and supercharge , easier to live with in my mind
l say milder motors and supercharge , easier to live with in my mind
#17
Registered
Thread Starter
Thx, yeah not exact graphics I was shopping for but really grown on me, think it's one of better graphics they did. Laura and Larry I think? That was chaos getting tied up. Was good time. Doing motors, interior, change some colors up a bit. Naturally aspirated is a bit easier on drives since I'm running bravos.
#18
Registered
Thread Starter
i went 555 ci short deck so i could keep it under factory hatch brodix heads solid roller 719 lift right around 9.8:1 comp got 807 on the dyno think it had 780 lbs of torque at 4600 rpm great acceleration runs a solid 92 mph 5" dry exhaust omg loud as hell but i love it
#19
I'm seeing 82-84 with 700 a side with 2 people full of fuel in fresh water. Turning 30p Maximus cut to 15" diameter 55-5600.
I'm thinking props are not exactly the right setup for the boat.
I'm thinking props are not exactly the right setup for the boat.