38 Scarab Build
#31
Registered
Ok I have a question as a Fountain owner and what everyone always has said is a flaw in the way they were built (Including Glass Dave).
Did you glass any of the stringers etc before you started putting them all together? The though being IF latter water does start to find its way in the whole structure doesn't soak up the water like a sponge, it can only go to as far as the piece it started.
Did you glass any of the stringers etc before you started putting them all together? The though being IF latter water does start to find its way in the whole structure doesn't soak up the water like a sponge, it can only go to as far as the piece it started.
#32
Registered
Yep all the pieces were glassed separately out side the boat once dried all edges were cleaned up then everything way installed and tabbed in. Once that cures then everything get wrapped with a few layers.
The following 2 users liked this post by division1:
hblair (02-14-2023), Wildman_grafix (02-15-2023)
#33
Registered
Progress is amazing!
The following 4 users liked this post by division1:
#35
Registered User
VIP Member
Thread Starter
The following 2 users liked this post by myoung3538:
87MirageIntruder (02-20-2023), hblair (02-24-2023)
The following users liked this post:
hblair (02-24-2023)
#38
Registered
^ Dam straight!