Exhuast through the transom below the water line?
#1
Registered
Thread Starter
Exhaust through the transom below the water line?
I am rigging a 32 classic and was wondering if anyone has ever had the exhaust exit through the transom and not the deck. Biggest reason is to have the exhaust below the water line at idle to keep me legal with the noise police. Hole on each side of the six drive would work nice I think.
Last edited by Brad Zastrow; 05-04-2007 at 09:55 AM.
#5
Registered
Thread Starter
I am keeping my canopy MTI for Poker Runs and Lake Michigan. I just bought this 32 as a crusier for our local Chain-O-Lakes. I have 525's with the sweep headers and I am worried about reversion if the tailpipes go up and out the deck holes. Plus having the exit under water at idle keeps me legal with the noise police.
Last edited by Brad Zastrow; 03-01-2007 at 06:21 PM.
#6
Registered
Join Date: Mar 2002
Location: Sterling Heights MI
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
What about those donkey dong extentions that go beneth the waterline at idle? You would need some custom pipe at the current exhause holes- but then you wouldn't need to cut the transom.
#7
VIP Member
VIP Member
B'yond Reason as a crusier?? SAY IT AINT SO!!!!
Q.
Q.
#8
Registered
Thread Starter
Keep in mind it will be a 120mph cruiser. We live on some smaller lakes and this will be perfect. If I get bored I know a good enigne builder. Ateco.
#10
VIP Member
VIP Member
120 for a Sunday cruise. That should work!!