Turbine 101
#401
Registered
![Default](/forums/images/icons/icon1.gif)
Hey guys just wanted to give you all a heads up on boats to watch for with PPS engines. One is a 50' NORTEC. Not sure if the boat has a name yet but I will find out. Another boat is named WARCRY and will be kept at the Ozarks. Another is running at lake Havasu,AZ. And like always FLAT BASTARD will once again compete with the IHBA at Firebird lakeAZ. We qualified second at the Coors light world finals and will go at it again in April. Enjoy the pics
#405
Registered
![Default](/forums/images/icons/icon1.gif)
Keep the pics. coming !
Jim,
I've seen and heard your workmanship up close & personal and it's 1st Class all the way.
Let's see some vids from the test cell also.
Ken
Jim,
I've seen and heard your workmanship up close & personal and it's 1st Class all the way.
Let's see some vids from the test cell also.
Ken
#408
Registered
Join Date: May 2003
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
bottom pic was in ventura ca in a popra race we were just comming up on bob norskog to pass him
driver barry g.
paul abreu throttles (psa marine)
mike rebilini nav
paul neufeld crew cheef
we raced with a four man crew
barry
warcry3
driver barry g.
paul abreu throttles (psa marine)
mike rebilini nav
paul neufeld crew cheef
we raced with a four man crew
barry
warcry3
#409
Registered
![Default](/forums/images/icons/icon1.gif)
we are using the torque meter system on the engine that moniters torque as you pull power. After talking to the customer and mercury racing we decided to only put down about 750 ft.lb.tq to the mercury drives. Plans are to upgrade the drives in the future. What we wanted to was upgrade everything inboard now to minimize what would need to be done when installing better drives. We really had very little room to do what the customer wanted. Here are some more pics.
#410
Registered
![Default](/forums/images/icons/icon1.gif)
we are using the torque meter system on the engine that moniters torque as you pull power. After talking to the customer and mercury racing we decided to only put down about 750 ft.lb.tq to the mercury drives. Plans are to upgrade the drives in the future. What we wanted to was upgrade everything inboard now to minimize what would need to be done when installing better drives. We really had very little room to do what the customer wanted. Here are some more pics.