36 Skater 1.24 or 1.35 Gears
#71
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Gatorone only what the Dyno sheets show for the one motor we took out and Dynoed 6 months ago.
1022 HP at 5900 RPM ( 996 HP at 6100 RPM)
978 Ft Lbs at 4600 RPM ( 861 Ft Lbs at 6100)
Air Temp 76 , 29.9 inches Barometric 700' elevation
Last weekend runs at 131 was air temp 87 1300 elevation, dry air (Lake Mead near Vegas) I know we loose HP on that lake.
So who knows for sure what's going on when I'm on the lake.
This 131 speed could have gone up with more time at that RPM (Ie let it run out farther but not much) and I did have a little throttle left.
I am going to send out the Props and have then scanned to tell us exactly what we have (they came with my 32 Skater I had before but they where used back then) ie: not exactly sure what they are as far as Cup and rake and are not labbed as far as i know.
1022 HP at 5900 RPM ( 996 HP at 6100 RPM)
978 Ft Lbs at 4600 RPM ( 861 Ft Lbs at 6100)
Air Temp 76 , 29.9 inches Barometric 700' elevation
Last weekend runs at 131 was air temp 87 1300 elevation, dry air (Lake Mead near Vegas) I know we loose HP on that lake.
So who knows for sure what's going on when I'm on the lake.
This 131 speed could have gone up with more time at that RPM (Ie let it run out farther but not much) and I did have a little throttle left.
I am going to send out the Props and have then scanned to tell us exactly what we have (they came with my 32 Skater I had before but they where used back then) ie: not exactly sure what they are as far as Cup and rake and are not labbed as far as i know.
#72
![Default](/forums/images/icons/icon1.gif)
Brien, Try this site to calculate speed vs weight and horsepower.
http://www.go-fast.com/boat_speed_predictions.htm
Weight is everything in the boat= fuel and meat sacks!
Do you have full time mufflers? Where do you trim the drives for full speed?
John B
http://www.go-fast.com/boat_speed_predictions.htm
Weight is everything in the boat= fuel and meat sacks!
Do you have full time mufflers? Where do you trim the drives for full speed?
John B
#73
#74
Registered
Thread Starter
Join Date: Jul 2002
Location: Yorba Linda,Ca.
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
nordic yea that was us at Echo Bay last weekend. I remember your boat it was very nice and sounded good as well. What a great weekend. Would like to go again.
#75
Registered
Thread Starter
Join Date: Jul 2002
Location: Yorba Linda,Ca.
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Skater40 yes I need to do that. I only had it at 6000 for a few seconds. I want to keep boating all weekend so i never keep my hand in it for very long.
#79
Registered
Thread Starter
Join Date: Jul 2002
Location: Yorba Linda,Ca.
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
nordicflame sorry about that we stayed at Echo Bay and there was a Nordic there as well. But yes I was at Calville looking at a houseboat for sale on Saturday. Where you the one racing my buddy in his 38 Donzi Comp up towards Wishing Well? He said he couldn't keep up with you.
#80
Registered
![Default](/forums/images/icons/icon1.gif)
nordicflame sorry about that we stayed at Echo Bay and there was a Nordic there as well. But yes I was at Calville looking at a houseboat for sale on Saturday. Where you the one racing my buddy in his 38 Donzi Comp up towards Wishing Well? He said he couldn't keep up with you.
Wasn't me racing your buddy. My little 496s don't scare many people
![Cool](/forums/images/smilies/cool.gif)
They are in the process of coming out and new 588 cubic inchers are going in. Should be a fun ~100mph ride then but I won't be chasing down any Skaters
![Drink](/forums/images/smilies/drink.gif)
We love it down there in the Fall and Spring. Maybe we'll run into you again and we'll stop and say hi.
Dave
Last edited by Nordicflame; 10-31-2008 at 06:17 PM.