glassdave

Well . . . . in case you wanna go racing and crane off the trailer you can do that now . . . . . and lower the center motors down about another half inch

glassdave

And so you dont slip off the shiny trailer . . . . super coolio Skater non slip on the drive guard fresh off my cutter





worse part is it looks to nice to step on

davidmercury

Man, Dave! I like what you're doing! yeh the skater is going to be ready to crane into the water now. Anybody have a strap for sale?
Pretty and clever with the radius notch on the tunnel pods!
I've never seen that done with the non-skid before, that's supercool!

davidmercury

Shoes have to come off early

waterboy222

Dave those non slip stickers are bad-A! I love them.. I may be hitting you up for some of those...

KEVLARKAT32

Looks great ! Are you bolting jack plates to transom with some kind of stainless plate to keep jack plate edge from chaffing paint ?

Jolley

Incredible job you guy's..... OUTSTANDING !!!!!!!

glassdave

Thats actually the way they were originally mounted and these were pretty much what was on it except they were the stainless ones (weighed a ton). Are we missing something? What would chafe? Do you have an example pic of what you are referring to? Thanks


Lemmie know, right now i only have black though. I can get clear but the quantity i have to buy is kinda pricey. I can do pretty much any logo in it

KEVLARKAT32

Yes I will post pix later . 0.90 stanless plates that get sandwiched between jack plates and transom . Yes the stainless Jack plates are a bit heavier but they are the only plates rated for severe offshore use . In your case you will most likely be OK only because those 2.5 wegh I think 350 lbs . In my case I have 3 Litres that weigh 505 . I had same alum plates on a checkmate that started to fail @ slot area after a few years of use . Just trying to help . If you need plates I can hook you up with them

Larry

davidmercury

I think the plates used between the jackplates and transom are good insurance with offshore outboard applications.