36 Skater Project
#272
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
#273
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
#274
Registered
![Default](/forums/images/icons/icon1.gif)
David, if it is the budget ck out the 7212. Much faster processor. Better graphics. Either one is great. Have 5208 in my 28. Might want to consider xm sat radio/wx also.
#275
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Thanks DR i'll give that 7212 a look as well as xm as they aready have me deep with four vehicles
#277
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Hey can you keep an eye out for a set of 15x34 three blade merc cleavers for me? I want to use them on the two inside motors.
Thanks for the compliment!
Last edited by davidmercury; 08-15-2011 at 05:26 PM.
#278
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Hey GlassDave look at this, port engine turned all the way with room to spare on the custom cut
![Drink](/forums/images/smilies/drink.gif)
The following users liked this post:
I'CE (09-28-2021)
#279
Registered
![Default](/forums/images/icons/icon1.gif)
David,
Not sure what you have in the middle but it may be cool to have a camera above the lifting ring outboard the engines both sides. You would have a wide view either side behind you. Send some pics of the transom so I can help find the right cam.
Not sure what you have in the middle but it may be cool to have a camera above the lifting ring outboard the engines both sides. You would have a wide view either side behind you. Send some pics of the transom so I can help find the right cam.