28 skater water ramps
#11
Gold Member
Gold Member
Join Date: May 2002
Location: DFW
Posts: 1,127
Likes: 0
Received 0 Likes
on
0 Posts
What does diamond do with the water pickups ? How much does the water pressure change with the modification ?
Longer skags make sense.
#12
Registered
I have no idea what they would charge now. I know 2 years ago it was very reasonable. I don't have it done to my boat but have a friend that did it. From what he told me it's a very noticeable difference. He said he could raise them as high as he wanted even to high where he had a ton of prop slip and still keep enough psi on a 300x to prevent the buzzer from going off.
#13
Gold Member
Gold Member
Join Date: May 2002
Location: DFW
Posts: 1,127
Likes: 0
Received 0 Likes
on
0 Posts
I have no idea what they would charge now. I know 2 years ago it was very reasonable. I don't have it done to my boat but have a friend that did it. From what he told me it's a very noticeable difference. He said he could raise them as high as he wanted even to high where he had a ton of prop slip and still keep enough psi on a 300x to prevent the buzzer from going off.
#14
Registered
#16
Registered
Join Date: Apr 2001
Location: Atlanta / Ft. Myers Fl.
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
#17
#18
Registered
Join Date: Feb 2004
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
I have compared the 2 the water ramps are not needed if you do the lower mods and you can run 2 inches of height with just the lowers done. both ways work for water pressure I think the drive is a better way to go if you really want every mph but then again you just might not see it. the hull mod is easy.
#19
I have the ramps But with the cross winds my water psi still would drop.So me and Rob at HTG racing did a mod to my lowers and it's fine now Iam going to rase my motors up to 1 7/8 and try it.If somebody can post pics for me that would be great just send me your email.
Ray
Ray