The "Tainted Lady"
#22
Registered
#23
Registered
Thread Starter
Skater built 3 of these. This is the third and last one that was built. The first went to Europe to race in P1, the second was used as cigarettes kilo boat and then turned into the poker run edition they sold, and this one is mine
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.
All that to say, I can't wait to get it on the water..
Tom
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.
All that to say, I can't wait to get it on the water..
Tom
Last edited by Tborisch; 03-23-2011 at 12:08 PM. Reason: was asked to remove the statement that it is for sale.
#24
Banned
Skater built 3 of these. This is the third and last one that was built. The first went to Europe to race in P1, the second was used as cigarettes kilo boat and then turned into the poker run edition they sold, and this one is mine
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.All that to say, I can't wait to get it on the water..
And yes, its for sale.
Tom
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.All that to say, I can't wait to get it on the water..
And yes, its for sale.
Tom
#25
Registered
Skater built 3 of these. This is the third and last one that was built. The first went to Europe to race in P1, the second was used as cigarettes kilo boat and then turned into the poker run edition they sold, and this one is mine
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.
All that to say, I can't wait to get it on the water..
And yes, its for sale.
Tom
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.
All that to say, I can't wait to get it on the water..
And yes, its for sale.
Tom
How are you? That boat looks great! I am still playing with the inflatable and so far I have only put one hole in it! How is the Donzi running?
Steve
#27
Skater built 3 of these. This is the third and last one that was built. The first went to Europe to race in P1, the second was used as cigarettes kilo boat and then turned into the poker run edition they sold, and this one is mine
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.
All that to say, I can't wait to get it on the water..
Tom
The bottom is a 46 rough rider that's been modified by skater. The notch in the back is bigger and some work was done to the steps. The bottom on my boat is 5" thick. 3 layers of core, sandwiched between carbon and kevlar. The boat ways 5040 pounds with just the Gimbals on it. With twin sterling 1150/1350's in it... we are looking to run 135 with pretty conservative propping.
All that to say, I can't wait to get it on the water..
Tom
#28
Registered
Thread Starter
Clear gets sprayed Monday, then I will toss a few more up. Chris Mills came up with this paint scheme and done an incredible job getting it on the boat. Couldn't be happier, unless we were going testing on Monday.. lol!
Tom
Tom