Originally Posted by Nastybug

[ATTACH=CONFIG]537585[/ATTACH]

Hey Guys, Starting to look like something. Here is a pic with the cockpit cut in. If you look close it looks like the dash resembles the 338 as you can see the humps where the two tacks go along with the speedo in center. didn't know that was coming but it is welcomed as before the tacks seemed to sit down below the steering wheel and harder to see. Also the center screen would have the ability to house a larger merc view if they come that way. Not sure. Steve.

Originally Posted by Nastybug

[ATTACH=CONFIG]537585[/ATTACH]

Hey Guys, Starting to look like something. Here is a pic with the cockpit cut in. If you look close it looks like the dash resembles the 338 as you can see the humps where the two tacks go along with the speedo in center. didn't know that was coming but it is welcomed as before the tacks seemed to sit down below the steering wheel and harder to see. Also the center screen would have the ability to house a larger merc view if they come that way. Not sure. Steve.

Originally Posted by skate

Looks great Steve. I can't wait to see how this beast runs.

Here is a photo from my 338 build which has the same dash. They usually put a nice GPS in the middle. [ATTACH=CONFIG]537591[/ATTACH]

Originally Posted by Nastybug

Hey Sam, What was the beam on your 338. I was told my cockpit wouldn't be any wider than the stock flat deck but it looks like it will if Im correct about the dash. Was just wondering about the amount of space on the deck there is to walk by cockpit up to the front. Steve.

Originally Posted by Helt

[ATTACH=CONFIG]537632[/ATTACH]
Like Sam said, "Plenty of room"

Originally Posted by skate

The beam was 10'6". You will have plenty of room to walk around.

Originally Posted by skate

Man Chris that a great looking boat!

Originally Posted by Nastybug

Hey Sam, My beam is only 10'2". Looks like Ill still have plenty of room. Thanx for the pics. Steve.