30' Skater Project Let the Journey Begin
#1
Registered
Thread Starter
30' Skater Project Let the Journey Begin
[ATTACH=CONFIG]545526[/ATTACH]
Well after much debate and being able to sell my 28' Skater I purchased this 30' from a good friend of mine. I have spent the first weekend going through the boat and boat coming up with a list of things that I hope will transpire this boat to my own.
First on the list was installing the skirts on the cowlings after having to cut them for the steering plates.
Before
[ATTACH=CONFIG]545527[/ATTACH]
After
[ATTACH=CONFIG]545528[/ATTACH] [ATTACH=CONFIG]545533[/ATTACH]
Also on the list is to rework the rigging tubes and rig tubes to allow better tilting off motors
[ATTACH=CONFIG]545529[/ATTACH] [ATTACH=CONFIG]545530[/ATTACH]
Lastly working on the hull pick ups. Motors were not quite getting enough water pressure. Redoing supply lines and increasing size of hose/fittings as well redrilling and tapping gear case.
Hope to have that done over this weekend.
Well after much debate and being able to sell my 28' Skater I purchased this 30' from a good friend of mine. I have spent the first weekend going through the boat and boat coming up with a list of things that I hope will transpire this boat to my own.
First on the list was installing the skirts on the cowlings after having to cut them for the steering plates.
Before
[ATTACH=CONFIG]545527[/ATTACH]
After
[ATTACH=CONFIG]545528[/ATTACH] [ATTACH=CONFIG]545533[/ATTACH]
Also on the list is to rework the rigging tubes and rig tubes to allow better tilting off motors
[ATTACH=CONFIG]545529[/ATTACH] [ATTACH=CONFIG]545530[/ATTACH]
Lastly working on the hull pick ups. Motors were not quite getting enough water pressure. Redoing supply lines and increasing size of hose/fittings as well redrilling and tapping gear case.
Hope to have that done over this weekend.
#2
Registered
Just in time- with Steves thread wrapping up nearly, we need another one. Lol... Thank you
#4
Ah Skater threads. Gods way of letting us know he loves us and wants us to go fast on water! Just in time for winter. Thanks Ron. BTW I have a nice wiring blueprint from a buddie and a few part left over from my build that we did know where they belonged if you need anything.
#6
Registered
Thread Starter
Possibly, I would love to use them but not sure if with pipe sticking out and the short distance between things whether or not it allow for much tilt. I will be working on this weekend and figure it out. Will definitely be in touch if I can make them work.
If you want to send a pair down for test I can send them back if does not work out.
Thanks!
If you want to send a pair down for test I can send them back if does not work out.
Thanks!