28 Skater tank job
#1
Platinum Member
Platinum Member
Thread Starter
28 Skater tank job
I finished up the tanks in my 28 and decided to do a few minor mods, cap job, hatch re-hang and some other cute stuff.
I had never shot gel cote before, but with some internet time, some information an a little help from friends, it is complete and sealed in PVA as we speak.
I'm pretty happy with the way it turned out, now some block sanding and color.
[ATTACH=CONFIG]547894[/ATTACH]
[ATTACH=CONFIG]547895[/ATTACH]
[ATTACH=CONFIG]547896[/ATTACH]
I had never shot gel cote before, but with some internet time, some information an a little help from friends, it is complete and sealed in PVA as we speak.
I'm pretty happy with the way it turned out, now some block sanding and color.
[ATTACH=CONFIG]547894[/ATTACH]
[ATTACH=CONFIG]547895[/ATTACH]
[ATTACH=CONFIG]547896[/ATTACH]
Last edited by Nice Pair; 05-31-2017 at 06:08 PM.
#4
Platinum Member
Platinum Member
Thread Starter
#5
Registered
When your done be sure to get some of these flush mount twist snaps from Tyson ( BigYellowCat).
Way nicer than having them stick up. Just replaced all 5 on 30 with them today.
[ATTACH=CONFIG]547921[/ATTACH]
[ATTACH=CONFIG]547922[/ATTACH]
Way nicer than having them stick up. Just replaced all 5 on 30 with them today.
[ATTACH=CONFIG]547921[/ATTACH]
[ATTACH=CONFIG]547922[/ATTACH]
#7
Platinum Member
Platinum Member
Thread Starter
p.s. "Nice boat"
Last edited by Nice Pair; 11-22-2015 at 08:43 PM.
#8
Platinum Member
Platinum Member
Thread Starter
Rookies become pros with practice, I'm still practicing. ;-)
#9
Platinum Member
Platinum Member
Way to go!!! Your hard work is paying off, looks great.
#10
Platinum Member
Platinum Member
Thread Starter