28 skater rear hatch
#1
Registered
Thread Starter
Join Date: Jun 2016
Location: Elburn, IL
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
28 skater rear hatch
does anyone have a rear hatch? Picked up a 28 project that had the rear hatch conversion done but the hatch is MIA. Let me know what’s out there
thanks!
thanks!
#4
Registered
I have the race hatch for a 28 that could be cut down to whatever length you wanted to make a rear hatch. I do not think that there is a “standard” size front to back.
#5
Registered
Thread Starter
Join Date: Jun 2016
Location: Elburn, IL
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered
have had 2 28s here that had hatches from new
and are 291/2 front to rear and bulkhead wall is in place on top of the factory floor liner raised area at the 90deg bend
so that would be the more common length for a factory hatch/ bulkhead wall to match the floor liner glassed flush
and are 291/2 front to rear and bulkhead wall is in place on top of the factory floor liner raised area at the 90deg bend
so that would be the more common length for a factory hatch/ bulkhead wall to match the floor liner glassed flush
Last edited by johnmiffco; 03-26-2018 at 11:12 AM.