315duramax

Locked in the hullside panel and shaped the chine lip. Upper hullside tomorrow and bond the panels in for glass this weekend

315duramax

Few updates on the boat. Sneak peak on the interior work. Hullsides done. About to get the big layup done on the inside.

jeff32

Amazing progress even the seats!

315duramax

Motors arrived today 😁 last panel on the sponson. Early next week we’ll be ready to put the deck back on! Transom is getting cut out now and starting to layup bulkhead panels

315duramax

Transom work started. Not very interesting pics. But she’s moving ! Sponson is ready to get locked internally.

noli

.

not my favorite kinda work but its gotta be done, and done to your standards

how thick will the transom be when its all done



.

315duramax

Ready for main sponson layup!

cowisl

hell of a job. thanks for posting

315duramax

Not too many pics to share. Got the initial inner sponson laid up. 3 layers of 1700 with 3 layers of 9oz S- glass to balance the resin ratio out. Laid it up all the back to the bulk head, between the stringers. Post baked the resin and letting it gas out. This weekend going to prep the glass and get it ready for 2 more layers of 9oz s-glass for a little wet bed, and 2 layers of Carbon for some added stiffness. Outside tabs are going on little at a time As it is spring rush and have a parking lot full of projects. Paint by may is getting a little pushed back due to the spring rush being crazy this year. Lets say paint by june

ill post a pic of the layup in a bit once i get a chance.

speicher lane

How does your layup differ (if at all) from the original from Skater?