Hull # Id Info
#1
Registered
Platinum Member
Thread Starter
Join Date: May 2003
Location: JERSEY SHORE, PA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Hull # Id Info
Will Sonic Or Anybody Out There Be Able To Tell Me What Was In This Boat(engine,drives,etc) When It Was Assembled At The Factory?? Here Is The Hull #
Amc31007d394
Amc31007d394
#3
Registered
Platinum Member
Thread Starter
Join Date: May 2003
Location: JERSEY SHORE, PA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
I Am In Jersey Shore Pa. It Is Between State College And Williamsport ( Home Of The Little League World Series.) Dont Know If It Is Still There.... But My Dad Used To Work At Tipps Hardware And He Used To Take Me Fishing In The Tuckerton Classic Fishing Tourament.. Caught A Butt Load Of Blues..
#4
Registered
Join Date: May 2006
Location: Tuckerton, NJ
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
Cool!!! Never knew there was a place called Jersey Shore, PA. Learn something new all the time. Tipps is still there in West Creek, hasn't changed much just got a face lift and looks more modern now. We do have good fishing around here. Good luck with your boat!! Doris
#5
Registered
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Call Bruce at Sonic, he might be able to dig it up for you..... He's a great guy, just have to keep on him for the info as he gets real busy... has helped me a lot with my retro....
#6
Registered
Platinum Member
Thread Starter
Join Date: May 2003
Location: JERSEY SHORE, PA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Whats Up B ??
I See Your 31 On The Classifieds. Looks Great.it Will Make Someone A Great Boat.i Did Talk To Bruce Yesterday, And He Was Able To Answer Every Question I Had For Him. Great Guy With Lots Of Info.
Still Had The Boats In Last Weekend Hoping To Maybe Put In On Sunday May Hit 70 And Sunny. It Is Our Turn To Come See You And B. I Will Talk To You Soon
I See Your 31 On The Classifieds. Looks Great.it Will Make Someone A Great Boat.i Did Talk To Bruce Yesterday, And He Was Able To Answer Every Question I Had For Him. Great Guy With Lots Of Info.
Still Had The Boats In Last Weekend Hoping To Maybe Put In On Sunday May Hit 70 And Sunny. It Is Our Turn To Come See You And B. I Will Talk To You Soon
#7
Registered
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Glad Bruce was able to help you out... good guy. Did the motors come up as the original equipment in that boat? Figure out what the problem is?
We were at several boat shows lately and have an idea of what we want to get into.... just have to see if we can sell the boat.... just have to get someone here to see it and it will go. If not sold by Christmas, we'll probably keep it through next season....
We were at several boat shows lately and have an idea of what we want to get into.... just have to see if we can sell the boat.... just have to get someone here to see it and it will go. If not sold by Christmas, we'll probably keep it through next season....
#8
Registered
Platinum Member
Thread Starter
Join Date: May 2003
Location: JERSEY SHORE, PA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
All The Info Matched All The #s. Always Thought My Motors Were 415hp. Now I Know They Are 390hp.now I Know Why I Can Only Spin That 23 Prop. I Cant Complain I Figure The Boat Is At Its Max. I Think I Told You, Me And Derek Hit 70.2 On The Gps At 5000rpm. I Should Be Satisfied......but...... Is There More There Without Adding More Power?????hmmmm.
#9
Registered
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Just go get that 358! We almost went to Miami 2 weeks ago for one..... that's when we decided it was time for a different change..... Chesapeake show.... we were on a cruiser and couple in front of us also has a sonic that they are moving out of.... small world!