The "Blown Formula" Sonic Project !!
#11
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Custome made diamond plate trim & tab pump brackets w/ 80 amp main fuse block & solenoids attached. Removable as a single unit by removing two bolts (and of course the hoses & battery connections!). Holley fuel pump, regulator, fuel tank switch selector & fuel filters to the left and also painted purple to match. I forgot to mention, all the pumps were diassembled, cleaned, flushed, new filter screens & gaskets were installed & all new solenoids.
Last edited by blown formula; 04-29-2003 at 05:07 PM.
#14
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
All trim, tab, fuel pumps, regulators, tank swtches & filters mounted to the seat base now. Notice the "faded" purple to yellow paint on the hatch lift mechanism. Matches the paint theme on the bow. Disassembled the lift, cleaned, greased and reassembled. Works like new!
#15
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Here you see the flush valves (yellow) that shut off the hull water pickups when running on the hose. Neat!. Supplies the sea pump only, no water overboard thru the pickups.
#18
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Back to the front now. The re-upholstered drop out bolsters.
And the new tilt hydraulic helm.
And the new tilt hydraulic helm.
Last edited by blown formula; 04-29-2003 at 05:02 PM.
#20
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
New Depth gauge. Remember Fred, the old one was stuffed into another old gauge housing so it would fit the 3 1/4" hole? Custom plug and flashing to mount gauge.