How to tighten shift cables
05-23-2004, 08:04 AM
#1
Registered
Thread Starter
Join Date: Jan 2004
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
How to tighten shift cables
Have a 358 and when I cruise the star. throttle always like to back off.
I checked the throttle bodies and they seem the same. Is there a adjustment to tighten throttle cables that I am missing? I pulled the shifters up and couldn't
find a adjustment.
I checked the throttle bodies and they seem the same. Is there a adjustment to tighten throttle cables that I am missing? I pulled the shifters up and couldn't
find a adjustment.
05-23-2004, 08:42 PM
#2
Charter Member #1055/Moderator
Charter Member
Re: How to tighten shift cables
What type of sticks do you have? There should be a tension adjustment at the shifters.
__________________
[img][/img]
[img][/img]
05-23-2004, 08:43 PM
#3
Charter Member #1055/Moderator
Charter Member
Re: How to tighten shift cables
What type of sticks do you have? There should be a tension adjustment at the shifters.
__________________
[img][/img]
[img][/img]
05-24-2004, 06:52 AM
#4
Registered
Join Date: Oct 2003
Location: Ballston Spa, New York
Posts: 532
Likes: 0
Received 12 Likes
on
10 Posts
Re: How to tighten shift cables
I had the same problem you did and called Gaffrig. If stand at the helm and look inside the rubber boot of the shifters you will see an allen screw. Just give this screw a little turn and this will increase the tension on the throttle.
05-24-2004, 05:08 PM
#5
Registered
Thread Starter
Join Date: Jan 2004
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to tighten shift cables
Originally Posted by splashandburn
I had the same problem you did and called Gaffrig. If stand at the helm and look inside the rubber boot of the shifters you will see an allen screw. Just give this screw a little turn and this will increase the tension on the throttle.
05-24-2004, 09:14 PM
#6
Registered
Thread Starter
Join Date: Jan 2004
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to tighten shift cables
Originally Posted by GO4BROKE
What type of sticks do you have? There should be a tension adjustment at the shifters.
I pulled the rubber up on shifter and could not find a allen adjustment screw
have any ideas?
