Logo Permission
#22
Registered
Thread Starter
#23
Registered
Join Date: Apr 2013
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
#26
Is that mat easy to clean? Do you just use a deck brush with soap and water? What happens if it comes time to remove it? Will it peel up in one piece or 1,000,000 little pieces? It looks great and seems like it would be much better than the carpet.
#27
Registered
Thread Starter
I actually changed the dimensions of one piece in the cockpit and had to pull up a piece that had been on for about 6 weeks. The adhesive is very strong, but it came up in multiple big pieces. It would tear where the pattern was milled down to a single layer.
#28
Registered
Platinum Member
Join Date: Jun 2005
Location: California Delta
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Yes, cleans up easy with soap and water. It's closed cell, so doesn't really get that dirty to begin with. But, that's part of the reason I went with black on top. I thought about doing white on top with black lines.
I actually changed the dimensions of one piece in the cockpit and had to pull up a piece that had been on for about 6 weeks. The adhesive is very strong, but it came up in multiple big pieces. It would tear where the pattern was milled down to a single layer.
I actually changed the dimensions of one piece in the cockpit and had to pull up a piece that had been on for about 6 weeks. The adhesive is very strong, but it came up in multiple big pieces. It would tear where the pattern was milled down to a single layer.