When will the new 38 be ready
#1
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Just curious as to when the new 38 will ready. I'm glad Sunsation is stepping up in size, they do a nice job for a smaller company, they have really improved over the years and seem to have a great following.
![Big Grin](/forums/images/smilies/biggrin.gif)
#2
Registered
Join Date: Oct 2000
Location: Algonac, MI USA
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Jassman,
We're a few months out still, we're in the middle of modifying the parts and then create the buck to pull the molds. Throwing a dart, the first 409 (42') should be floating in about 9 months, maybe a little longer, maybe a little shorter. It's shaping up to be a stunning looking boat. We're confident this boat will exceed not only ours, but everyone's expectations.
We're a few months out still, we're in the middle of modifying the parts and then create the buck to pull the molds. Throwing a dart, the first 409 (42') should be floating in about 9 months, maybe a little longer, maybe a little shorter. It's shaping up to be a stunning looking boat. We're confident this boat will exceed not only ours, but everyone's expectations.
#4
Member #9
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Dave, what is the deal with Denny no longer at Sunsation? He no doubt accelerated the changes to boats and even increased sales by signing up new dealers and now I hear he is long gone and got kicked to the curb...
![Frown](/forums/images/smilies/frown.gif)
![Mad](/forums/images/smilies/mad.gif)
__________________
Member of the Liquid Jungle
Member of the Liquid Jungle
Last edited by hp500efi; 08-28-2004 at 02:24 PM.
#5
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Originally Posted by DaveSunsation
Jassman,
We're a few months out still, we're in the middle of modifying the parts and then create the buck to pull the molds. Throwing a dart, the first 409 (42') should be floating in about 9 months, maybe a little longer, maybe a little shorter. It's shaping up to be a stunning looking boat. We're confident this boat will exceed not only ours, but everyone's expectations.
We're a few months out still, we're in the middle of modifying the parts and then create the buck to pull the molds. Throwing a dart, the first 409 (42') should be floating in about 9 months, maybe a little longer, maybe a little shorter. It's shaping up to be a stunning looking boat. We're confident this boat will exceed not only ours, but everyone's expectations.
Thanks Dave, I know it will be nice, I know it's early, but will it have over 6' headroom like the competition, and can it accomadate triples, thanks and good luck to you guys, looking forward seeing the product. Jeff
#6
Registered
Join Date: Oct 2000
Location: Algonac, MI USA
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Jassman,
It will have 6' of head room but no space for triples but will have capability for staggered setup.
HP500efi,
Yes, Denny is no longer with us. I'm sorry for your disapointment but things just didn't work out. Denny is a great guy, no doubt about that but things were not as they may have seemed.
ccarlos,
yes the SS396 when all is said and done will be roughly 42' and named the 409. It's gonna be a barn burner and is really shaping up beautifully.
It will have 6' of head room but no space for triples but will have capability for staggered setup.
HP500efi,
Yes, Denny is no longer with us. I'm sorry for your disapointment but things just didn't work out. Denny is a great guy, no doubt about that but things were not as they may have seemed.
ccarlos,
yes the SS396 when all is said and done will be roughly 42' and named the 409. It's gonna be a barn burner and is really shaping up beautifully.
#7
Member #9
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Dave, I read in PB mag that you have decided to use the Powerplay mold for this new boat? is that correct? Did the old 396 mold ever get built?
The Powerplay certainly has some good lines to it and hopefully you will have more success than they did.
The Powerplay certainly has some good lines to it and hopefully you will have more success than they did.
__________________
Member of the Liquid Jungle
Member of the Liquid Jungle
#8
Registered
Join Date: Oct 2000
Location: Algonac, MI USA
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
HP,
Yes we are using Powerplays 38 hull as the platform to build our 40. Dan has a very proven hull in his 38 and as well for economic reasons why we choose him. The 40 will be 42'2" with an integrated swim platform, we've already changed the exterior so much you'd never tell what boat was the base platform. As Wayne says - it's looking like a Dominator on Steroids. We raised the hull sides, opened the cockpit up, changed the deck, the fairing, the cabin entrance, the hull sides, etc., etc., etc,. We’re very pleased with the progress so far. Dave Moriarty, Wayne and the crew aren’t letting any moss grow under their feet, they’re putting in some heavy hours to move this new flagship forward to meet the huge demand.
Yes we are using Powerplays 38 hull as the platform to build our 40. Dan has a very proven hull in his 38 and as well for economic reasons why we choose him. The 40 will be 42'2" with an integrated swim platform, we've already changed the exterior so much you'd never tell what boat was the base platform. As Wayne says - it's looking like a Dominator on Steroids. We raised the hull sides, opened the cockpit up, changed the deck, the fairing, the cabin entrance, the hull sides, etc., etc., etc,. We’re very pleased with the progress so far. Dave Moriarty, Wayne and the crew aren’t letting any moss grow under their feet, they’re putting in some heavy hours to move this new flagship forward to meet the huge demand.
#9
Registered
Join Date: Dec 2003
Location: Ottawa, Ontario,Canada baby!
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Little confused Dave, has Sunsation reciently decided to go with this mold as a platform? I was under the impresion that the Inovator designed from scratch was testing grounds for the longer 396! Will the two hulls share any R&D?
#10
Registered
Join Date: Oct 2000
Location: Algonac, MI USA
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Jeff,
We did not purchase the 38 Powerplay molds, just a complete set of actual parts; hull, deck, liners, etc. We are changing the parts to our specs for the 409. You are right, the Innovator was the testing platform for the 396, that orignal design (and we wont drop any names here), did not work....initially. Wayne & Dave Moriarty made many, many, many changes to make that hull work. Now that Innovator hull is an EXCEPTIONAL hull, for the 32 length but nothing any longer. The 409 and 32 Innovator will be completly different, we are using some of the deck Innovator tooling and front bow portion, but thats about it.
We did not purchase the 38 Powerplay molds, just a complete set of actual parts; hull, deck, liners, etc. We are changing the parts to our specs for the 409. You are right, the Innovator was the testing platform for the 396, that orignal design (and we wont drop any names here), did not work....initially. Wayne & Dave Moriarty made many, many, many changes to make that hull work. Now that Innovator hull is an EXCEPTIONAL hull, for the 32 length but nothing any longer. The 409 and 32 Innovator will be completly different, we are using some of the deck Innovator tooling and front bow portion, but thats about it.