joneill

i have a 24 with a 225 pro max and wondering if i should go with a jack plate?

SUPERSTITIOUS

I believe the jackplate is a must if your looking for top end as well as a setback if at least 12"

rchevelle71

You mean your motor is mounted on the Transom???

if so then Hell Yeah!!! Just ordered the 10" for the Pantera(similar hull), 6" wasnt enough, motor hit the transom when tilted.

joneill

yes it is on the transom, what is the better brand to go with?

SUPERSTITIOUS

Id do a 12in. setback then add the electric jackplate behind it to pick up an additiional 3-4 in. Good to go in many conditions. Oh yeah Id do transome bracing as well.

thayes11

My uncle has a 24' i/o converted it to an o/b with a 12' Setback. Worked out real nice with a 250 EFI, did not ride as good with the o/b but went few mph faster and was more reliable.

joneill

what mph should i hope to pick up by going with the jack plate, or setback?

FX10

If I'm not mistaken, Superbash has a 18" on his 2003 24' Superboat. The boat rides and handles sweet.

FX10

Also if setting back the motor. Remember that all that torque on the transom is multiplyed. A tie bar system need to be put in.

joneill

are you guys running 20 or 15" mids? i have a 20"