Drive spacer results
#32
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Originally Posted by OH-ZONE
Pat;
I did try the prop. It was too much prop, thats why I didn't sent it to you. Awesome cruse though I couldnt't get the engine over 4700-4800 without overtriming it with speeds in the low 70's. Lots of blade area on that prop and carried the boat nicely. Brett suggested a smaller diameter....
I did try the prop. It was too much prop, thats why I didn't sent it to you. Awesome cruse though I couldnt't get the engine over 4700-4800 without overtriming it with speeds in the low 70's. Lots of blade area on that prop and carried the boat nicely. Brett suggested a smaller diameter....
__________________
Patrick
Patrick
#33
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Pat...I agree. PE It was a 26p Maximus stock on loan from BBlades. It has gone back...
__________________
Gary H...
Gary H...