prop pitch
08-10-2006, 11:24 AM
#11
Registered
Thread Starter
Join Date: Dec 2002
Location: newhamburg ont. canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: prop pitch
thanks Super air, goin to the lake in an hour, i'm pumped to see how the chopper works again, i have the boat in the water now so i have no idea how high the motor is. any idea John ? i think the light just went on, Bash mentioned motor height before and to switch to a torque master. so if i got it correct i'm surfacing a prop. that is'nt meant to be surfaced. anyways 83 degrees, sun is shinning prop. testing, and then large volumes of beer, don't know much about boats but, us canadians know beeeer. later Rick
09-02-2006, 10:05 PM
#12
Registered
Thread Starter
Join Date: Dec 2002
Location: newhamburg ont. canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: prop pitch
i was correct, no spark to number 3 cylinder, loose wire to the coil, now i'm a happy camper, and the trophy is fantastic. 6300 rpm and 66 on 2 gps's there is more there just did'nt have the guts to hang it out. that water was friggin big on saturday, should'nt have been out but could'nt resist. a special thanks goes out to superbash for all his information, and eveyone else as well, lets all hope for some better weather before it starts getting cold. Rick
