prop pitch
#1
Registered
Thread Starter
Join Date: Dec 2002
Location: newhamburg ont. canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
whata do you guys think ? 24 suoer with 225x spins 6500- 6800 rpm, i went from a 22" chopper to a 21" trophy, i can only spin it to 5200 or 5400 trimmed way up, love the trophy as to handling and hole shot, should i go for a 19" ? thanks Rick
#2
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Get in touch with Superbash. He is the man for outboard set-up questions.
The trophy is a 4 blade, right? It does sound like you have too much pitch.
If you have to trim high, you might also consider raising the engine up.
The trophy is a 4 blade, right? It does sound like you have too much pitch.
If you have to trim high, you might also consider raising the engine up.
__________________
Patrick
Patrick
#3
Registered
![Default](/forums/images/icons/icon1.gif)
Something is wrong ! u spin a 22 chopper at 6800 and the 21 trophy is 5400 ? My buddie just bought a 24 from LITESPEED and runs a trophy and I think its a 23 spinning at 5800 with a stock 200 . Whats the propshaft height ?
#4
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
That Boat Used To Be Mine And Ran The Best With A Lab 24 ET Wheel The 22 Chopper Was My Second Wheel Of Choice And Works Good .. Going From The 22 Chop To A 21 4 Blade Should Not Bring The revs Down That Much Put The Chopper Back On //Go On The Prop Site And Ask On There See What They Say////////////////////////////////////////////////////
#5
Registered
Thread Starter
Join Date: Dec 2002
Location: newhamburg ont. canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
hey, lightspeed. whatsup ? i was thinking of ordering a 19" today, but already decided i am going to toss the chopper back on for this weekend to use as a base line and try again, i really would'nt have thought the 4 blade would take it so low, it's just i wanted it for takeing the kids tubbin, the chopper just will not do that. Rick
#6
Registered
Join Date: Aug 2006
Location: SUPERBOAT COUNTRY
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
O.K. First off....Me & QuickRick talked about what better prop he should run for speed & handling instead of the 22 Chopper .... all winter !!!
-Yeah the 4 blades are harder to spin. That's why we go from a 3 Blade down to a 4 Blade. We've all been there. Done that.
From experience...going from a 21SB to a 24SB with the same engine I droppped two prop sizes while staying in the same rpm range of the given engine.
21 Superboat
250EFI(5800limit) 1:75's
27 TrophyPlus
5750rpms
24 Superboat
250EFI (5800limit) 1:75's
25 trophyPlus
5800rpms
****************************
21 Superboat (S&F's "ridemotox" )
225X (6800limit)1:87's
23 TrophyPlus
6600rpms
24 Superboat (Rick's)
225X(6800limit)1:87's
22 Chopper 6800....21 TrophyPlus 5400 ???
Are we sure that 22 Chopper wasnt labbed down QuickRick???
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
-Yeah the 4 blades are harder to spin. That's why we go from a 3 Blade down to a 4 Blade. We've all been there. Done that.
From experience...going from a 21SB to a 24SB with the same engine I droppped two prop sizes while staying in the same rpm range of the given engine.
21 Superboat
250EFI(5800limit) 1:75's
27 TrophyPlus
5750rpms
24 Superboat
250EFI (5800limit) 1:75's
25 trophyPlus
5800rpms
****************************
21 Superboat (S&F's "ridemotox" )
225X (6800limit)1:87's
23 TrophyPlus
6600rpms
24 Superboat (Rick's)
225X(6800limit)1:87's
22 Chopper 6800....21 TrophyPlus 5400 ???
Are we sure that 22 Chopper wasnt labbed down QuickRick???
![](http://img520.imageshack.us/img520/373/bashos0.gif)
#7
Registered
Thread Starter
Join Date: Dec 2002
Location: newhamburg ont. canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hey bash, just sent you a jumbo p.m. took me half an hour to type, ya know one finger. good point about the pitch being altered, i think i know what your talking about, can they be altered that much ? anyone looking for a virgin 21" trophy ? thanks Rick
#8
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Rick Sell The Boat And Buy My New One This Way You Wont Have To worry About What Prop You Are Spinnin Mine Is Already Dialed In 104+ Just think How Fast You Can Pull The Kids On A Tube Hahaha Good Luck On Your PropDialing In
#9
Registered
Thread Starter
Join Date: Dec 2002
Location: newhamburg ont. canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
hey John, yep, that idea has crossed my tiny mind, that boat looks like big time fun. anyways one of these days i gotta get me a digital camera and post some pics. since i got her from you i added a complete jl audio system, had the interior redone and updated, and as we speak the trailer is being painted black with some bling, bling rims to match, got rid of the fx4 and got a mark lt, gotta match you know. so the prop hunt continues, goin toss the 22" back on this weekend and give it another spin, 52mph on gps just don't cut it. take care Rick
#10
Registered
Thread Starter
Join Date: Dec 2002
Location: newhamburg ont. canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hey Guys, i was just playing in the merc. prop selector site. have any of you guys found their selections remotely close ? for weight i used 2800 pounds, 2000 hull, 500 motor, 300 rigging, does this sound close ? they reccomend a 17" mirage or a 15" rev. 4, wtf, now i am super confused. wish there was a place around here i could try differnt props. going to put the 22" back on and try it, i'm starting to wonder if all cylinders are fireing, seems to run perfect though, any thoughts would be appreciated thanks again Rick