flash32118 ????
#1
Gold Member
Gold Member
Thread Starter
flash32118 ????
I saw a post from flash32118 in another thread. His comment says 24 Superboat 750 H.P.
I'd like to hear the scoop on this boat. I couldn't imagine having 750 HP in my boat!
I'd like to hear the scoop on this boat. I couldn't imagine having 750 HP in my boat!
#2
VIP Member
VIP Member
Could this be the boat?
Zup knows the scoop with the one on LI.
__________________
Patrick
Patrick
#4
Registered
Gold Member
Join Date: Jan 2004
Location: 1000 Islands NY
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Step or straight bottom 750hp is a LOT of power for the 24! You guys have any knowledge of how the 24 reacts to a shorty?
#6
VIP Member
VIP Member
#7
Easily Distracted
Platinum Member
JC Perfs brother. Tim Cropper is Flash ... lives in Daytona .. hes the nicest of the Cropper brothers (lol)
__________________
Bad Girls Make Good Company
Bad Girls Make Good Company
#8
VIP Member
VIP Member
I believe that the prop shaft depth on our boats from the factory is right on the money for 3 and 4 blade props.
It is too low for a 5 blade or 6 blade though.
I ran Gary H's 5 blade and had to trim real high to get the boat to run fast. T-Mone runs a P5-X on his Pantera and does loose speed from having to trim real high. The 5 blade is the ticket in the rough for sure.
My guess is that with a shorty and a 5 blade Hydro P5-X on the our boats would run real fast and handle awesome...
__________________
Patrick
Patrick
#9
Registered
Gold Member
Join Date: Jan 2004
Location: 1000 Islands NY
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
I believe that the prop shaft depth on our boats from the factory is right on the money for 3 and 4 blade props.
It is too low for a 5 blade or 6 blade though.
I ran Gary H's 5 blade and had to trim real high to get the boat to run fast. T-Mone runs a P5-X on his Pantera and does loose speed from having to trim real high. The 5 blade is the ticket in the rough for sure.
My guess is that with a shorty and a 5 blade Hydro P5-X on the our boats would run real fast and handle awesome...
It is too low for a 5 blade or 6 blade though.
I ran Gary H's 5 blade and had to trim real high to get the boat to run fast. T-Mone runs a P5-X on his Pantera and does loose speed from having to trim real high. The 5 blade is the ticket in the rough for sure.
My guess is that with a shorty and a 5 blade Hydro P5-X on the our boats would run real fast and handle awesome...
Last edited by cuposterchild; 04-23-2007 at 03:16 PM.
#10
VIP Member
VIP Member
Do you think there is any repercussions drive wise when trying to push a 5 blade prop with an older stock bravo when already pushing around 500hp and 500 lbs/tq? I am thinking the 24's might be light enough that it wouldn't be a problem but I would be a little nervous. Pat does T-Mone any beefed up drive internals?
I don't think a 5 blade vs. 4 blade vs. 3 blade is going to make that much of a difference.
__________________
Patrick
Patrick