Y2K/Arneson
#41
Registered
Platinum Member
Thread Starter
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
Rick and Rik, thankyou both for bring so much info to this thread on the Surface drive. Only time will tell ( perhaps a new Y2K and a new factory install ). Pat, Mike your never ending knowledge make this site GREAT !!!!! Thanks Gary
Last edited by Superbabi; 07-26-2007 at 06:27 PM.
#42
arneson-industries.com
Offshoreonly Advertiser
When I was building mine, I contacted Arneson and was told the notch would have to be filled. I was also concerned with possible not enough bow lift(less of an issue now). Maneuvaribility was also a concern for me in tight spaces with a single. JC listened to me and said he'd do anything I'd want, just opening up a new can of worms with lots of R&D and prop testing, with my limited boating time my tune changed. I'd love to see someone try though...
RIK...I Absoultely love that Skater...Its one of my screensavers!!!
RIK...I Absoultely love that Skater...Its one of my screensavers!!!
#43
Registered
#44
Registered
Rik,
Got your e-mail, with pics. Here they are resized.
Also here is the link to the windows site to download the Image resizer.
http://www.microsoft.com/windowsxp/d...powertoys.mspx
Got your e-mail, with pics. Here they are resized.
Also here is the link to the windows site to download the Image resizer.
http://www.microsoft.com/windowsxp/d...powertoys.mspx
Last edited by FX10; 07-29-2007 at 09:11 AM.
#46
Registered
Rik,
If this ASD6 was set up at the factory from day one. What kind of speed increase would it be from, say a Bravo XR ?The hull does 84 now, with a single 525.
If this ASD6 was set up at the factory from day one. What kind of speed increase would it be from, say a Bravo XR ?The hull does 84 now, with a single 525.
#47
VIP Member
VIP Member
Hay I see you found the rest of my screensavers too!
__________________
Gary H...
Gary H...
#48
Registered
#49
Registered
#50
Registered