FX10

Our part of building the boat should be done in around a few weeks. Then it's off to Aqua Marina in Freeport for rigging. The first one is getting a 300 Merc.

FX10

Spayed up the new mold for the forward hatch / trunk, plus skinned it out. Tomorrow I'll lay it up. Wednesday it will be fitted on the deck for the first time.

LEOPAJM

Rick .... Is Aqua the dealer ? Or are they just doing the rigging ? I take it these first two are going to existing customers ? I am interested in checking these 30's out when finished !!!! Looks great !

Ed

Speaking of floors/cockpit soles...will the 30 CC be completely self-bailing, say, with a pair of 200's on the transom & a full payload?

FX10

Leopajm,
Aqua Marina is the distributor of the Y2K CC's. Located in Freeport. The first hull is going to Paul, the owner. And the second one is for sale. here's the lnk to his Marina.
http://www.aquamarinaworldwide.com/

Rick

FX10

Yes, the cockpit is self bailing.

Ed

Cool...will it drain through the transom or out the sides?

FX10

Through the transom

BRD

Thanks Rick !

FX10

Yesturday the forward hatch / trunk was layed up and fully cored it with Divinycell foam coring. Todat it's getting fitted and installed. Have to get the gas lifts, and figure the placement of them. I want this hatch to have a negative pull on it initially, like the cabin hatch on the Y2K. After lifting it a few inches, the gas lifts will do the rest. It should work awesome.