Superboat 30 Y2K! Me three!
#191
Registered
.
if you ever drag your boat down to Miami, there's a nice bunch of riders there called Keys Island Runners, all outboards go fast
their next event is in April
.
if you ever drag your boat down to Miami, there's a nice bunch of riders there called Keys Island Runners, all outboards go fast
their next event is in April
.
#192
VIP Member
VIP Member
Thread Starter
[QUOTE=scippy;4729444]9w south off 84 to broadway to waterfront there’s the city of Newburg public launch. It’s pretty nice though not that big of a place and not an over abundance of parking. Thanks for the kind words!
__________________
Gary H...
Gary H...
#193
VIP Member
VIP Member
Thread Starter
I have seen (I believe your) posts about it. Looks like a blast. At my age 62, I’m pondering retiring in FL. Heck I went to FIU back in 78/79! Who knows....
__________________
Gary H...
Gary H...
#196
VIP Member
VIP Member
Thread Starter
Slow go bro’s. The width of these new motors plus the wing plates for the external steering have complicated the Installation of the motors where as there would be a binding situation with the steering rams and boat. We will be setting the motors back another 3 inches that will be a total of 22 inch setback from the transom. Having people that are willing to work during the shut down is also a challenge as well. Always seem to be waiting for something. Finally got P&G Canvas dialed in with a Bimini as he’s been doing much needed medical supplies/shields etc. for the local hospitals 👍. Bimini looks great though! Hope to get working on the cockpit cover as well as a transport cover once we get the interior together. Just trying to get back in the groove as John has got a couple other boats in process.
__________________
Gary H...
Gary H...
The following users liked this post:
noli (06-06-2020)
#197
VIP Member
VIP Member
Thread Starter
With a nice boot for the Bimini as with my old boat this will tuck
in behind the rear seat under the hatch nicely
in behind the rear seat under the hatch nicely
__________________
Gary H...
Gary H...
The following users liked this post:
noli (06-06-2020)
#198
Registered
Hang in there Gary. It's going to come together for you... Keep the faith... Thanks for the conversation today, I know you are busy but I appreciate your time.
#200
VIP Member
VIP Member
Thread Starter
Had P&G duplicate what he did for me on my last boat, this one may be a touch lower and slightly longer. I’ve run into the upper 50’s -60 with the last without issue. This time I added an additional detachable forward center tether That will attach to the nearest grab handle mounted center on the deck between the canopy’s for additional confidence at speed.
Yes. Stainless steel.
Yes. Stainless steel.
Last edited by SUPERSTITIOUS; 06-22-2020 at 11:12 PM.