Superbabi !! Heres your pics of your Y2K
#3943
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
#3944
arneson-industries.com
Offshoreonly Advertiser
I thought all you guys already bought Imco's
Basically, the box does not need to be mounted on the running surface, rather several inches above it and depending upon the transom angle of the boat, the height ranges so to speak.
The portion of the box, once the box is mounted at the correct height, that would protrude below the notch is all that would need a filler piece so to speak.
Basically, the box does not need to be mounted on the running surface, rather several inches above it and depending upon the transom angle of the boat, the height ranges so to speak.
The portion of the box, once the box is mounted at the correct height, that would protrude below the notch is all that would need a filler piece so to speak.
Last edited by Rik; 08-26-2008 at 05:34 PM.
#3945
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
#3946
arneson-industries.com
Offshoreonly Advertiser
Photos.... Hell that is like asking for $$ from people. The simplist things are the hardest to get from people.
I ask, I ask, I wait..
This weekend should provide feedback from two of the three though.
#3947
VIP Member
VIP Member
Ya know Ga, I always wanted that setup but the limited amount of test time available for me held me back. This new setup would certainly be interesting to follow.
Hay RiK I owned a Blackhawk Edition Donzi 22 for a while. Makes me wonder with the reduced blade diameter of the bravo props what ya think of a counter-rotating dual prop setup Arneson drive??? Would that achieve better bite? Again the availability of props comes to mind as well as there expense. Maybe a great next project
Hay RiK I owned a Blackhawk Edition Donzi 22 for a while. Makes me wonder with the reduced blade diameter of the bravo props what ya think of a counter-rotating dual prop setup Arneson drive??? Would that achieve better bite? Again the availability of props comes to mind as well as there expense. Maybe a great next project
__________________
Gary H...
Gary H...
Last edited by SUPERSTITIOUS; 09-06-2008 at 04:23 PM.
#3948
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
Slow to get results. Three customers have them, one blew his engine before he got a chance to try it, another one that was going to try it the day he got it won't be able to test till this weekend, and the third over anxious customer has yet to install it.. Maybe he will test this week?
Photos.... Hell that is like asking for $$ from people. The simplist things are the hardest to get from people.
I ask, I ask, I wait..
This weekend should provide feedback from two of the three though.
Photos.... Hell that is like asking for $$ from people. The simplist things are the hardest to get from people.
I ask, I ask, I wait..
This weekend should provide feedback from two of the three though.
#3950
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts