Let The Projects Begin
#51
Gold Member
Gold Member
Re: Let The Projects Begin
I'm thinking I am just going to have to go up a few inches. I don't think it will be that hard to do and won't look bad. I will probably have to have my sunpad redone so it doesn't stick up above the side gunnels. I can get thinner, higher density pad.
#52
VIP Member
VIP Member
Thread Starter
Re: Let The Projects Begin
Brought the heads to the machine shop at lunch time today.
Valve job, bowl port & blend, 0.010 face, new springs, retainers, locks, and seals.
Next week the block goes in for a good cleaning, ball honing and cam bearings.
Now for that AZ Speed intake and some blue paint...
Valve job, bowl port & blend, 0.010 face, new springs, retainers, locks, and seals.
Next week the block goes in for a good cleaning, ball honing and cam bearings.
Now for that AZ Speed intake and some blue paint...
__________________
Patrick
Patrick
#56
VIP Member
VIP Member
Re: Let The Projects Begin
Looking Good!
__________________
Gary H...
Gary H...
#58
Registered
Join Date: Jan 2004
Location: "SUPERBOATLAND" LONG ISLAND - NEW YORK
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Re: Let The Projects Begin
Like New Dave!!!...
(Get rid of that BallValve on the fuel supply...useless...don't know why they are put in at factory???)
(Get rid of that BallValve on the fuel supply...useless...don't know why they are put in at factory???)
Last edited by SUPERBASH; 02-07-2005 at 06:55 PM.
#59
Gold Member
Gold Member
Re: Let The Projects Begin
Originally Posted by SUPERBASH
Like New Dave!!!...
(Get rid of that BallValve on the fuel supply...useless...don't know why they are put in at factory???)
(Get rid of that BallValve on the fuel supply...useless...don't know why they are put in at factory???)
Last edited by Dave M; 02-07-2005 at 08:03 PM.