Prototype Y2K Single scoop hatch
#41
Registered
![Default](/forums/images/icons/icon1.gif)
Sure install,twin hydrolic pistons to open and close.That will pull it down
tight and even. Battery switch under the seat for access to jump if needed.
I will admitt , I wasnt impressed with the hatch at first but it does look sweet installed.Now the billet grill.
tight and even. Battery switch under the seat for access to jump if needed.
I will admitt , I wasnt impressed with the hatch at first but it does look sweet installed.Now the billet grill.
#42
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Hey Zuper,
I bet the Superman logo " S ", would look sweet on that hatch. John and Bob were working on the template for the billet incert today.
I bet the Superman logo " S ", would look sweet on that hatch. John and Bob were working on the template for the billet incert today.
#44
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I might be able to rig something like I use for the cabin hatch on the engine hatch. That is, if John lets me experiment alittle. LOL
Tom,
Look at the areas that I have the lines to. Those areas are'nt supposed to be gelcoated, but I figured if you cut out a opening for a access hatch, you can get even more storage. John does'nt know yet. The areas are approx 5" wide and the length of the bench. Plenty of room for jackets and additional ropes.
Rick
Tom,
Look at the areas that I have the lines to. Those areas are'nt supposed to be gelcoated, but I figured if you cut out a opening for a access hatch, you can get even more storage. John does'nt know yet. The areas are approx 5" wide and the length of the bench. Plenty of room for jackets and additional ropes.
Rick
#45
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Rick...
Any picture of what JC came up with for the air intake on the new hatch?
Any picture of what JC came up with for the air intake on the new hatch?
__________________
Gary H...
Gary H...
#46
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
It's machined from 3/4" aluminum. I'll get a pic. You can have it powder coated to match your bezels. It's pretty nice looking.
#49
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Tom I Am So Sorry I Forgot. All I Could Think About Is How Rick Let Me Paint Your Deck Over, Don't Worry A Good Roller & 12.99 A Gallon Paint!!!!!! Ha Ha Only Kidding..........it Was 5.99 A Gallon !!!!!!