Winter Rebuilds
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: Tampa, FL
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Got the Sutphen in the shop having trannies replaced, and the TRS drives rebuilt, and the 502's checked out at Craig Colabellas shop in St. Cloud. Here are a few pics.
#5
Registered
Thread Starter
Join Date: Jul 2004
Location: Tampa, FL
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#6
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Nov 2003
Location: Colonial Beach, VA
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Could you tell where the water originated in the stringer? Was it from the motor mount? My engines are out now too and the transom assemblies have been off and replaced. The wood right around the openings was starting to get a little wet. The wood is sealed up with glass now. Originally the cross section of the plywood in the transom was painted.
#8
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
wk & jammin....
if you guys get a chance could you post a full, clear picture of your inner transoms showing both plates, etc. while the motors are out..?
thanks a lot
chris
if you guys get a chance could you post a full, clear picture of your inner transoms showing both plates, etc. while the motors are out..?
thanks a lot
chris