HTRDLNCN

454 Merc needs rebuild , Edelbrock rpm intake , large ovalports ( post 1 of 1)

454 Merc out of my boat,blew a headgasket and cooked a piston ,
will throw in the heads if you want them but they are peanut ports, .
Engine was still running and had good/normal oil pressure and water temp before I pulled it out. Extremely clean engine inside and had about 300 hours.
No fuel pump boss so I think its a gen 5 but it does not have a roller cam .
No oil pan,intake,flywheel,balancer or timing cover.. $300 picked up in Lago Vista (30miles NW of Austin)

Edelbrock rpm intake for BBC , painted orange , $100 picked up


large oval ports
#6272292
show up as 70-77 454,chevelle,corvette,etc
crane dual springs and normal car style rebuild.
Do not have hardened seats.
$300 picked up

pslonaker

I have a great 502 mag with 470 hours on it if you need a replacement. The 502 has never even had a valve cover removed...just a solid stock 415 HP motor.

HTRDLNCN

thanks but a little late ,
bought a Merc 502 shortblock for on ebay
and just had it gone thru at the machine shop.
Basically ended up with a balanced and fresh 502 shortblock for $2000
Just need to locate some proper heads now.

pslonaker

Bummer...I have heads...large oval ports with the heart shape combustion chamber off of a 2001 454 MPI already setup for a roller...$500.00...got pics if you want to see...email me at [email protected] and I can send them to you. You are just down the road a piece from me anyway.

HTRDLNCN

I didnt think Merc was using normal ovalports since the mid 80s?
Just peanuts and squareports?
Definately intrested.
Ill shoot you an email.

jeff1000man

If you still have this stuff after the weekend, I will come get all of it. I use those parts a lot.

Jeff

320es

What Gen and how much? I may have some interest.

HTRDLNCN

For those that asked its a 4bolt main block