Miscellaneous Valve Train Parts, cams and pistons….
#1
Registered
Thread Starter
Miscellaneous Valve Train Parts, cams and pistons….
(2) full sets of Crane Gold 1.7 Rockers. Bodies are older but fulcrums and wheels look perfect. Look to have been rebuilt.$175 for both sets.
All of the following have less than 30 hours…
(2) CompCams solid roller billet cams… virtually perfect. Grind 300-5/308-5R12 (264/272 at .050 112 LSA .714/.714) Serial #J2347 cards available.
$250 for the pair.
(2) full set of CompCams solid roller lifters… Less than 30 hours; all measure .8412-.8414 even over the very slight wear/witness marks. $300 for both sets.
(2) sets, matching CompCams .080 push rods $50
(2) sets of springs Compcams 943-16… Less than 30 hours. $150 for both sets.. Includes locators
(2) sets of Ferrea 2.250 intake valves +.250 $75 for all 16
A set (8) of SRP pistons w/pins “212148” 4.530/1.395 CH / small 17cc dome $150
Addition pictures by request…
Make an offer
Thanks,
Dave
All of the following have less than 30 hours…
(2) CompCams solid roller billet cams… virtually perfect. Grind 300-5/308-5R12 (264/272 at .050 112 LSA .714/.714) Serial #J2347 cards available.
$250 for the pair.
(2) full set of CompCams solid roller lifters… Less than 30 hours; all measure .8412-.8414 even over the very slight wear/witness marks. $300 for both sets.
(2) sets, matching CompCams .080 push rods $50
(2) sets of springs Compcams 943-16… Less than 30 hours. $150 for both sets.. Includes locators
(2) sets of Ferrea 2.250 intake valves +.250 $75 for all 16
A set (8) of SRP pistons w/pins “212148” 4.530/1.395 CH / small 17cc dome $150
Addition pictures by request…
Make an offer
Thanks,
Dave
Last edited by Nordicflame; 08-28-2008 at 10:23 AM.