cmi headers and tail pipes
#1
Registered User
Thread Starter
Join Date: Dec 2008
Location: tucson, az
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
cmi headers and tail pipes
they came with a motor i bought they where presure tested and then run for about 15 hrs on a boat in lake michigan.
2 sets of headers and 4 tail pipes from another application$2000 for every thing
2 sets of headers and 4 tail pipes from another application$2000 for every thing
Last edited by cody_white83; 02-07-2009 at 03:49 PM.
#2
Registered
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
headers
Im interested in your headers please get me more pics and I need some dimensions when you can . Measure the over all height from one of the bolt holes (wanting to make sure theyfit under hatch) Are these for a TRS set up (with a tranny) . These are for big block merc , chevy right? thanks
#7
Registered User
Thread Starter
Join Date: Dec 2008
Location: tucson, az
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
yes 2 sets of headers and 4 tail pipes the headers came off of a different boat than the tail pipes did. there are 2 sets of headers one set is the older rope style and are slightl taller. the other set are the newer style and are only an inch or two short. they were run on a cat they had to use the shorter ones on the outside to clear he engne compartment. the picture shows one of each style.
#8
Registered
Join Date: Dec 2008
Location: NJ
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
headers
i am interested in your headers do you have pics of both sets would you email them to me thanks steve [email protected] or give me a call 913-927-0890 thanks
Last edited by 97 FOUNTAIN; 02-08-2009 at 07:29 PM.