WTB Bravo shift cable insert only
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: STEVENS POINT WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
WTB Bravo shift cable insert only
I reciently had my drive apart after i lost forword gear on the 4th for the fireworks. I had the threads on a pivot pin get stretched out and i welded it 2 years ago. It still wobbled out Well this time i plug welded it solid and drilled for a Helicoil and locktite. Well because i hyper extended the ujoints a bit the pinion seal started leaking into the bilge. then the drive got hard to shift because it was low on oil. All is fixed now but still a bit tough to get into forword with a spongy cable. Does any one have just the insert laying around i could buy off of them? Funds are tight this year. I would prefer not to have a whole new cable with liner as i just replaced because of a blown ujoint 3 years ago. I need jsut the liner for a standard Merc bravo.. thanx again. [email protected]
#5
Registered
Thread Starter
Join Date: Jul 2004
Location: STEVENS POINT WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Yes i would imagine a person can get tjust the inner. If you have a contact that will work with me please email me [email protected]
#6
Registered
Thread Starter
Join Date: Jul 2004
Location: STEVENS POINT WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Ding ding ding...... and we have a winner. I got osome one to sellme a cable alone for just $20. plus 78 for the bellows. He is callin back on a lower for a 90hp mariner lower for a 1990 motor.