2 New engines collecting dust
#11
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I can build you 2 of them
The 468CI in my Magnum did 700HP+- Not turning over 6000RPM's. And it is built to turn like that all day long. 1/4 long rods on the short crank, 7.5:1 static and low (6.5lbs) boost.
![Wink](/forums/images/smilies/wink.gif)
Last edited by jeff1000man; 02-26-2010 at 08:16 AM.
#13
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
#14
Registered
![Default](/forums/images/icons/icon1.gif)
ive talked about doing that but everyone says that to convert a non blower motor into a blower motor, im better off selling what i have and buying a blower motor or building from scratch.
#15
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Just depends on what you are all ready working with. Parts still cost money to replace. If you can use some of what you all ready have, then you are that far ahead.
#16
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Getting a few redundant questions.
Engines are complete minus (this means you will need, or I can help you find)
exhaust
wiring harnesses
bellhousings
couplers
sending units
misc hoses for your application
hose clamps
It doesn't state in original ad, but these engines do have the oil & power steering coolers also.
Engines are complete minus (this means you will need, or I can help you find)
exhaust
wiring harnesses
bellhousings
couplers
sending units
misc hoses for your application
hose clamps
It doesn't state in original ad, but these engines do have the oil & power steering coolers also.
#18
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
NOW also includes GIL manifolds with dry tails through the transom.
Included at 12K.
For an extra 1000, I can have 2 drive couplers and bell housings installed for Bravo
If you have transmission boat, I have bellhousings included at this price.
That would leave you needing only wiring harnesses and senders out of your old boat. And misc hoses etc for your specific application.
Instalation available.
Thanks, Jeff
Included at 12K.
For an extra 1000, I can have 2 drive couplers and bell housings installed for Bravo
If you have transmission boat, I have bellhousings included at this price.
That would leave you needing only wiring harnesses and senders out of your old boat. And misc hoses etc for your specific application.
Instalation available.
Thanks, Jeff
#19
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Found the bravo couplers. Included at 12K. Can't beleive no one needs a good set of engines. Bring offers. Need them gone yesterday.
Have water temp senders installed. No oil temp senders.
Basically the engines at this point need wiring harnesses, senders, bellhousings, starters and hoses for your water circulation.
Those are the things I don't have any more.
Have water temp senders installed. No oil temp senders.
Basically the engines at this point need wiring harnesses, senders, bellhousings, starters and hoses for your water circulation.
Those are the things I don't have any more.